Conquest 2-46 Line Borer

2-46 DUAL 23 SPINDLE LINE BORING MACHINE WITH 4 FLIP STOPS and 132 inch FENCE CAPACITY  230 Volt 3 Phase or  460 Volt,  3 Phase having Pneumatic Foot Pedal Operation, two Pneumatic Index Pins and two Pneumatic Hold Downs, with Working Table Height of 37.5", crated this weighs 1,175 pounds:

Features and Specifications

• Two Independently operated 23 Spindle heads with helical case hardened steel Gears and independent precision digital measurement
• Two Pneumatic Hold Downs
• 3048mm (120 inch) fence length
• Air index pins
• Working table height = 37.5 inch
• Pneumatic pedal control shuts off motors when released
• Center distance between spindles = 32mm
• Center distance between first and last drill spindles = 704mm (27.7")
• Drill spindle accepts 10mm shank bits/24 left - 22 right
• Motors (2) = 2 HP - 208-230/450V [6.2-5.8/2.9 Amps] 60 cycle - Three Phase
• Spindle speed = 3450 rpm
• Maximum drilling depth = 6.03cm (2-3/8")
• Operating pressure = 80-100 psi
• 42 x 50 inch floor space required (120 x 55 inch w/ extensions)
• Machine weight (approx.) = 1100 lbs/1175 lbs Crated
• Optional thru-drilling brake
• Optional Pneumatic Flip Stops
• Optional Fence extensions and Additional Flip stops

Options

• Pneumatic Flip Stops.
• Quick Release Chucks.
• Dust Collection Shrouds.
• 440 Volt (2.9 amps) 60 Hz Three Phase.
• Additional 44 inch Fence Extensions and Flip Stops.
• 3rd Hold Down For Dense Surfaces (HPL etc.).
• Through Brake To Eliminate Breakout When Through Boring.

Why a Conquest 2-46?                       

• Pneumatic Operation.
• 132" Fence Capacity.
• 2 Pneumatic Index Pins.
• 2 Pneumatic Hold Downs.
• 4 Heavy Duty Cast Flip Stops.
• Telemechanique Control System.
• Heat Treated Steel Helical Gears.
• Available through brake to eliminate breakout when through boring.
• 2 Individually Moveable 23 Spindle Heads with TEFC BALDOR Motors For High Production

• Built in the USA.
• Accepts 10 Milimeter Flat Shank Bits, 24  Left Hand and 22 Right Hand maximum drilling depth of 60 mm (30 mm with quick release option).
• A Top Down Machine with optional Through Brake to eliminate break through when through boring, Quick Release Chucks, Pneumatic Flip Stops, 3rd Hold Down for hard surface materials (HPL etc.), Dust Collection Shrouds.
• Distances:

 Between heads center to center 14CM or 5-3/4 inch.

30 Inch Maximum Throat Adjustment (from fence to point of drill bits on #2 Head.

32 Milimeter Centers, distance between first and last drill = 27.7 inch.

• Dual 23-Spindle Heads for rapid production.
• Individual Precision Head Movement with Precision Digital Positioning.
• Operating Pressure of 80-100 PSI.
• Telemchanique Control System.
• Two Baldor motors, 3,450 RPM, 2 HP, 220 Volt (5.8 Amps), 60 HZ three phase, (440 Volt, 2.9 amps optional).
• Two Indepently Operated Boring Heads with Heat Treated Gears.