Technical Sales 1–800–458–3687

Kregtool DK1100 Single Spindle Pocket-Ho

poket hole machine poket hole machine poket hole machine
Single-Spindle Electric
Pocket-Hole Machine
Single-Spindle Pneumatic
Pocket-Hole Machine
Benchtop Single-Spindle Pneumatic
Pocket-Hole Machine

 

pdf logo   Manual Download

Single-Spindle Electric Pocket-Hole Machine

  • Works with any 20-amp 110-volt outlet
  • Strong 1-1/2 HP electric motor
  • Single-spindle simplicity
  • Cycle times of less than 1 second

The DK1100 series of machines are the standard in the industry for drilling a single pocket hole at a time. Weve packed these machines with functional features that set them apart from the competition. Choose from electric or pneumatic-powered, freestanding or bench-mounted to fit the way you build. Each DK1100 machine is built with industrial-grade motors that provide the power to run day after day quickly, quietly, and reliably in even the most high-production environments.

Add real productivity and efficiency to your shop with the Production Pocket-Hole Standard. This model works with any standard 20-amp 110-volt outlet and features a strong 11/2-HP electric motor, single-spindle simplicity, and a cycle time of less than one second.

Convenient Swing Stops
Quickly position two pocket holes across rails of various widths by placing it against one stop, drilling the hole, and then repeating with the rail against the other stop. For drilling pocket holes in panels, the stops simply swing out of the way.

Adjustable Fence
Adjustments couldnt be easier, as the fence adjusts from the top side of the machine to let you center a screw in 1/2- to 1-1/2 inch thick material. The clamp hold-down also adjusts to allow materials up to 4 inchthick to be drilled.

Quick Drill Bit Changes
Changing drill bits is a quick and simple process. Simply loosen the collet with the provided Allen wrench, replace with a new bit, and you are back in production in less than 60 seconds.

Long-Lasting Motors
The industrial-grade motors used in Kreg machines are built for long-lasting service. Kreg machines are also designed to minimize stress on moving parts, greatly reducing the likelihood of failure

Specifications
Motor 1-1/2 inch HP, 110-volt, single-phase
Drill Bits DKDB Drill Bit
3/8 inch shank diameter
3/16 inch pilot
1/2 inch long
CFM Rating 1 CFM clamp cylinder (90 PSI/minute)
Cycle Time 1 second
Material Clamping Capacity 4 inch thick
Hole Centering Capability 1/2 to 1-1/2 inch thick
Weight 176 lbs
Dimensions 50H x 24W x 24D inch (40 inch table height)
Warranty 5 Year

 

pdf logo   Manual Download

Single-Spindle Pneumatic Pocket-Hole Machine

  • Hardened-steel drill guide maximizes drill bit life
  • Industrial-grade motor for long-lasting service
  • One-touch, pneumatic operation by foot pedal
  • Swing Stops for optimized material positioning
  • Dust collection chute for efficient chip removal

The DK1100 series of machines are the standard in the industry for drilling a single pocket hole at a time. We’ve packed these machines with functional features that set them apart from the competition. Choose from electric- or pneumatic-powered, freestanding- or bench-mounted to fit the way you build. Each DK1100 machine is built with industrial-grade motors that provide the power to run day after day quickly, quietly, and reliably in even the most high-production environments.

Add real productivity and efficiency to your shop with the Production Pocket-Hole Standard. This model works with any standard 20-amp 110-volt outlet and features a strong 11/2-HP electric motor, single-spindle simplicity, and a cycle time of less than one second.

Convenient Swing Stops
Quickly position two pocket holes across rails of various widths by placing it against one stop, drilling the hole, and then repeating with the rail against the other stop. For drilling pocket holes in panels, the stops simply swing out of the way.

Adjustable Fence
Adjustments couldn’t be easier, as the fence adjusts from the top side of the machine to let you center a screw in 1/2- to 1-1/2 inch thick material. The clamp hold-down also adjusts to allow materials up to 4 inchthick to be drilled.

Quick Drill Bit Changes
Changing drill bits is a quick and simple process. Simply loosen the collet with the provided Allen wrench, replace with a new bit, and you are back in production in less than 60 seconds.

Long-Lasting Motors
The industrial-grade motors used in Kreg machines are built for long-lasting service. Kreg machines are also designed to minimize stress on moving parts, greatly reducing the likelihood of failure

Specifications
Motor 1-1/4 inch HP
Drill Bits DKDB Drill Bit
3/8 inch shank diameter
3/16 inch pilot
1/2 inch long
CFM Rating 8 CFM at 50 percent duty cycle (120 PSI/minute)
Cycle Time 1 second
Material Clamping Capacity 4 inch thick
Hole Centering Capability 1/2 to 1-1/2 inch thick
Weight 138 lbs
Dimensions 50H x 24W x 24D inch (40 inch table height)
Warranty 5 Year
Included (1) Single-Spindle Pneumatic Pocket-Hole Machine and Complete Owner's Manual

 

pdf logo   Manual Download

Benchtop Single-Spindle Pneumatic Pocket-Hole Machine

  • Compact design; perfect for smaller workspaces
  • Hardened-steel drill guides maximizes drill bit life
  • One-touch, pneumatic pedal operation by foot pedal
  • Swing Stops for optimized material positioning
  • Dust collection chute for efficient chip removal

The DK1100 series of machines are the standard in the industry for drilling a single pocket hole at a time. We’ve packed these machines with functional features that set them apart from the competition. Choose from electric- or pneumatic-powered, freestanding- or bench-mounted to fit the way you build. Each DK1100 machine is built with industrial-grade motors that provide the power to run day after day quickly, quietly, and reliably in even the most high-production environments.

This model is identical to the DK1100 FP, but comes in a much smaller frame. It features a table height of 8 inch, making it easy to build into your workbench or relocate from time to time. Requires a compressor able to produce 8 CFM at 120 PSI (50 percent duty cycle)

Convenient Swing Stops
Quickly position two pocket holes across rails of various widths by placing it against one stop, drilling the hole, and then repeating with the rail against the other stop. For drilling pocket holes in panels, the stops simply swing out of the way.

Adjustable Fence
Adjustments couldn’t be easier, as the fence adjusts from the top side of the machine to let you center a screw in 1/2- to 1-1/2 inch thick material. The clamp hold-down also adjusts to allow materials up to 4 inchthick to be drilled.

Quick Drill Bit Changes
Changing drill bits is a quick and simple process. Simply loosen the collet with the provided Allen wrench, replace with a new bit, and you are back in production in less than 60 seconds.

Long-Lasting Motors
The industrial-grade motors used in Kreg machines are built for long-lasting service. Kreg machines are also designed to minimize stress on moving parts, greatly reducing the likelihood of failure

Specifications
Motor 1-1/4 inch HP
Drill Bits DKDB Drill Bit
3/8 inch shank diameter
3/16 inch pilot
1/2 inch long
CFM Rating 8 CFM at 50 percent duty cycle (120 PSI/minute)
Cycle Time 1 second
Material Clamping Capacity 4 inch thick
Hole Centering Capability 1/2 to 1-1/2 inch thick
Weight 77 lbs
Dimensions 19H x 24W x 24D inch (8 inch table height)
Warranty 5 Year
Included (1) Benchtop Single-Spindle Pneumatic Pocket-Hole Machine and Complete Owners Manual

 

Models and Accessories
DK1100 FE Kreg 1-Spindle Electric Pocket Hole Machine
DK1100 FP Kreg 1-Spindle Floor Pneumatic Pocket Hole Machine
DK1100 TP Kreg 1-Spindle Table Pneumatic Pocket Hole Machine
DB210-HDB Kreg HD Drill Bit
DB210-HDBB Kreg HD Drill Bit and Bushing
DB210-MBB Kreg Micro Drill Bit and Bushing
DKDB Kreg 3/8 inch Step Drill Bit for Kreg Pocket Machines, 6-3/4 inch length
LH-DKDB Kreg 3/8 inch Left-Hand Step Drill Bit for DK3100

 

DK1100 FE
KREG 1-SPINDLE ELECTRIC POCKET HOLE MACHINE
Mfg. item #: DK1100 FE
KR-DK1100 FE
lease to own for as little as:$80 per month!
Kreg freight $15 for orders less than $1001038
$3,999.99

365
DK1100 FP
KREG 1-SPINDLE FLOOR PNEUMATIC POCKET HOLE MACHINE
Mfg. item #: DK1100 FP
KR-DK1100 FP
lease to own for as little as:$80 per month!
Kreg freight $15 for orders less than $1001038
$3,999.99

365
DK1100 TP
KREG 1-SPINDLE TABLE PNEUMATIC POCKET HOLE MACHINE
Mfg. item #: DK1100 TP
KR-DK1100 TP
lease to own for as little as:$76 per month!
Kreg freight $15 for orders less than $1001038
$3,799.99

365
DB210-HDB
KREG HD DRILL BIT
Mfg. item #: DB210-HDB
KR-DB210-HDB
Kreg freight $15 for orders less than $1001038
$24.99

365
DB210-HDBB
KREG HD DRILL BIT AND BUSHING
Mfg. item #: DB210-HDBB
KR-DB210-HDBB
Kreg freight $15 for orders less than $1001038
$39.99

365
DB210-MBB
KREG MICRO DRILL BIT AND BUSHING
Mfg. item #: DB210-MBB
KR-DB210-MBB
Kreg freight $15 for orders less than $1001038
$34.99

365
DKDB
KREG 3/8 STEP DRILL BIT FOR KREG POCKET MACHINES, 6-3/4 LENGTH
Mfg. item #: DKDB
KR-DKDB
Kreg freight $15 for orders less than $1001038
$39.99

365
LH-DKDB
KREG STEP BIT 6-3/4" LEFT HAND
Mfg. item #: LH-DKDB
KR-LH-DKDB
Call for freight quote on this item or we will confirm freight charges before shipping.1
$35.99

360
Copyright © 2021 Smith-Hamilton, Inc
0.007 210212 11:56