- Complete full panel preparation in seconds
- Cuts, notches and hems your eaves, hips and valleys
- Dies available to accommodate multiple profiles
- Meant for all standing seam metal roof panels
- Adjustable jacks for leveling
|Models and Accessories|
|STHYP19||Hyper Light Compact Towable SnapTable w/Trailer Includes 1 Set of Standard Notchers|
|PRO18||SnapTable Pro (Without Trailer) - SnapTable Includes 1 Set of Standard Notchers|
|SSN-01||Standing Seam Notcher - Notches standing seam ribs, can accommodate panel from 12 - 24 inch, features a 29 inch offset|
|PC-01||Panel Cutter - Cuts a perfect straight edge across the flats, cutter max of 60 inch|
|EVH-01||Eave and Valley Hemmer - Provides perfect lines on straight and valley cuts, hemming max of 60 inch|
|ANS||Angle Notchers - Angle Notcher Set|
|CMSTR||Cut Master - Notch and cut on straight runs|
|SNS||Standard Notchers - Standard Notcher Set|
The SnapTable Pro is an all-in-one panel preparation system for preparing and installing standing seam metal roofing. This tool is designed to perfect and speed-up your panel preparation process while producing factory like cuts. This complete system is made up of 3 key components: the standing seam notcher, the panel cutter, and the eave and valley hemmer. The SnapTable Pro adds quality and saves time on any commercial or residential job. It is equipped to notch, cut & hem your snap lock and standing seam profiles at your eves, hips and valleys. This machine is manually operated by one person and requires no electricity.
|Panel Sizes:||12 inches - 24 inches|
|Notching Offset:||29 inches|
|Cutting Capabilities:||Up to 60 inches|
|Hemming Capabilities:||Up to 60 inches|
|Suggested Maximum Panel Thickness:||20 gauge|
|Purpose:||All-in-one panel preparation tool notches, cuts, and hems panels in seconds|
|Can Be Used With:||Cor-Ten, Nail Strip, SnapLock, Mechanical Seam, Zip-Rib, and many more options.|
|SnapTable with out Trailer||184 x 48 x 53 inches 1,000 lbs|
|SnapTable with out Trailer||192 x 60 x 48 inches 1,100 lbs|
The Stand Seam Notcher is a component of the SnapTable Pro. It notches the standing seam ribs on both male and female sides of the panel and can accommodate panel from 12 - 24 inch. It can be used for straight cuts as well as angles and features a 29 inch offset. The notcher comes with a custom set of dies of your choice.
By running the panel half way through the notchers, you can notch just the ends for your leading and trailing edges. The notchers slide to the left and right depending on what side of the roof yourâe going up. Setting up for an angle is as easy as locating the desired angle on the degree operator ruler on the machine and then shifting the notcher on the operator side to the correct pitch.
The standing seam notcher weighs 350 lbs and is 40 inch in length.
(Additional dies can be purchased to accommodate other profiles)
|Panel Sizes:||12 inches - 24 inches|
|Notching Offset||29 inches|
|Suggested Max Panel Thickness||20 gauge|
|Can Be Used With||Cor-Ten, Nail Strip, SnapLock, Mechanical Seam, Zip-Rib, and many more options|
|Purpose||It precisely notches standing seam and snap lock panels to leave a perfect notch within seconds|
The Panel Cutter is a component of the SnapTable Pro. It was designed to provide a perfect straight edge cut across the flats of standing seam metal panel. It features a dual edge blade for double the cutting life and is known to last for thousands of cuts. This machine features a cutter max length of 60 inch and weighs 250 lbs. To set up for an angle cut, simply unlock the clamp and rotate the table top. It can rotate 360 degrees and comes on a base stand with wheels for ease of transportation. Proudly designed and manufactured in the USA.
|Rotation Capabilities||360 degrees|
|Max Cut Length||60 inches|
|Total Length||77 inches|
|Features||Dual edge blade for double the cutting life|
The Eave and Valley Hemmer is a component of the SnapTable Pro. It provides perfect lines on your valleys consistently. This tool has a rotating table top and adjustable teeth to always provide an even amount of pressure to your hems. To accommodate an angle, simply unlock the clamp and rotate the table top to the desired angle. Your hems will always look in sync regardless of who did the hemming! This tool works on all panel profiles and helps achieve a perfect hem in seconds. Proudly designed and manufactured in the USA.
|Hemming Capabilities||Up to 60 inches|