Auto Feed Systems - Roller Conveyor Table
The Dake CT60 and CT120 Roller Conveyor Tables feature solid steel construction and adjustable table legs to allow easy set up with any available saw, drill, ironworker and punching machine.
Model CT60 shown above
|
|
- Powder painted 10 gauge steel channel with bolt-in cross members
- Steel rollers with sealed bearings
- Stands for height adjustment from 27-3/8" to 39-3/8"
- Open conveyor
|
|
|
|
CT60 Plastic Roller w/Inserts
|
|
|
|
CT60 Plastic Roller
|
|
|
|
|
|
|
model
|
CT60-CT120
|
|
maximum material capacity
|
135lbs/ft (rollers 12" on center)
|
|
roller diameter
|
1.9"
|
|
standard available widths (between rail)
|
13", 15", 19"
|
|
table length
|
60â (CT60) 120â (CT120)
|
|
Auto Feed Systems - Heavy Duty Automatic Stop/Pushing
The Dake FS60 and FS120 save time and money with quick and precise positioning. The pneumatic auto-brake, located directly on the moving carrier, locks in the stop position eliminating slip and
motor load. With its precision steel guide and hardened double ball bearings, the moving carrier is built to last. The systems also feature a servo motor with a precision rack and pinion to ensure
fast, accurate positioning with no back lash. Adjustable table legs allow for easy setup with any available saw, drill, ironworker and punching machine.
Model FS60 shown below
|
|
- Horizontal pneumatic gripper
- Precision linear steel guide rails with rack and cable trays
- Easy retrofit to existing or selected conveyors and tables
- Carriage with hardened double ball bearings
- Magnetic linear encoder for direct measuring
- Steel faceplate with manual arm lift, adjustable in X / Y / Z directions
|
- Position controller for single position with manual mode, inch/metric conversion and automatic arm retract
- Linear error compensation, 100 points
- Control stand (free standing)
- Motor brake for secure positioning
- Left or right side mounting
|
|
|
FS60 Pneumatic Gripper
|
|
|
|
FS60 Stop Arm in
Lift Position
|
|
|
|
|
model
|
FS60-FS120
|
|
travel speed
|
15in/sec, others available upon request
|
|
repeatability
|
+/- 0.001in (+/- 0.03mm)
|
|
encoder accuracy
|
+/- 0.001in/ft (+/- 0.1mm/m)
|
|
total length
|
measuring length + 26in
|
|
brake force
|
2,000N with pneumatic brake option
|
|
table length
|
60â (FS60) 120â (FS120)
|
|
Auto Feed Systems - Manual Stop
The Dake DA60 and DA120 Manual Stop Systems with digital display offer a cost effective way to boost productivity. The operator can quickly and accurately move the gauge into the correct position.
A quick turn of the lever locks the arm into position.
Model DA60 shown below
|
|
- Guide rail with T-slots for easy retrofit
- Carriage with contact bump stop and Roto-lock lever
- Roller bearings for smooth and easy positioning
- Inch / metric tape rule with indicator
|
- Left or right side mounting
- Battery powered LCD display with inch/metric and fractional display
- Waterproof (IP67 rated) magnetic linear encoder
- Fine tune adjustment knob for 0.001" positioning
|
|
|
DA60 Stop Arm
in Lift Position
|
|
|
|
DA60 Brake
|
|
|
|
|
|
model
|
DA60-DA120
|
|
brake force
|
500N
|
|
resolution
|
0.001" or 1/64 fractional or 0.01mm
|
|
total length
|
measuring length + 6"
|
|
table length
|
60â (DA60) 120â (DA120)
|
|
Auto Feed Systems - Heavy Duty Manual Stop
The Dake DS60 and DS120 Manual Stop Systems with digital display offer a cost effective way to boost productivity. The operator can quickly and accurately move the gauge into the correct position.
A quick turn of the lever locks the arm into position.
Model DS60 shown below
|
|
- Steel guide with easy retrofit mounting
- Carriage with steel roller bearings for easy positioning
- Roto-lock brake system
- Fine tune adjustment knob for 0.001" positioning
- Handwheel driven carriage with pneumatic brake
|
- Steel faceplate with manual arm lift, adjustable in X / Y / Z directions
- Inch / metric tape rule with indicator
- Battery powered digital LCD readout with inch/metric conversion and fractional display
- Magnetic linear encoder for direct measuring
- Left or right side mounting
|
|
|
DS60 Stop Arm
in Lift Position
|
|
|
|
DS60 Carriage
|
|
|
|
|
|
model
|
DS60-DS120
|
|
brake force
|
2,000N
|
|
resolution MD50
|
1/32" scale, 1mm scale
|
|
total length
|
measuring length + 12"
|
|
arm adjustment
|
width: 8", length: 20", others upon request
|
|
table length
|
60â (DS60) 120â (DS120)
|
|
