chat now with southern tool
Technical Sales 1–800–458–3687

DAKE ZIP Series Mitering Bandsaw

TRAD301 Shown Above

ZIP 22 Unique design makes this bandsaw a real problem solver and an exceptional value.These Johnson mitering horizontal bandsaws will miter up to 60º to the right, and anywhere in between. They also feature head down feed, multimode cutting, quick set cam-activated vises, direct drive, and a heavy cast head frame.

Click to download manual

Features  
  • Head down feed is gravity fed and controlled by way of an infinitely variable flow control valve (except Zip 22). The flow control allows for presetting the down feed rate and retaining this setting at the end of the cut, to minimize dead air cutting.
  • Heavy cast head frame for rigidity and roller and carbide guides for optimum cutting quality. Easily set the most appropriate blade and head descend speed according to the stock material, size and shape for maximum efficiency.
  • Drive system. Direct drive means full power to the drive wheel without horse power loss through belts and pulleys. Low maintenance without belts and pulleys.
  • Multimode features allow three different cutting modes (except Zip 22): 1. Manual mode 2. Manual mode with hydraulic down feed regulation 3. Automatic down feed
  • Quick set cam-activated vises. Adjustable vise with handwheel for initial set up and quick release cam lever for repeat cutting. Vise on the Trad 300 model is gib adjustable.
  • Miter up to 60 degrees to the right, and anywhere in between. The head, NOT the material, rotates for angle cutting. (Trad 301 will miter up to 45 degrees left.)
Standard Equipment  
  • Fabricated oversize steel base
  • Vises Quick set cam action type
  • Combination guides  Roller and carbide
  • CE certified electrical  Low voltage controls, thermo overload, low voltage coil
  • Mechanical blade tensioning Blade breakage shut off (except Zip 22)
  • Stock stop
  • Multimode feature (except Zip 22)
  • Coolant Pump Electric with flow control
  • Head feed  Hydraulic regulated head down feed rate (except Zip 22)
  • Direct drive gear box
  • Door interlocks and end-of-cut shut off
  • Adjustable manual head return
  • Material support roller
SPECIFICATIONS
model 974026-1
Machine Type Manual feed horizontal mitering band saw
Blade Size 82 inches x ¾  inch x .035
Blade Speeds 1 speed
Min/Max Feet Per Minute 197 F.P.M
Head Feed Manual pull down feed with spring resistance and spring assisted return
Vise Manual with quick release
Miter Cutting Capabilities Up to 60 degrees right
Controls CE Certified 24-volt
Horsepower 1 h.p.
Weight 397 lbs
Work Height 36 inches
Overall Height 57 inches
Base Width 28 1/4  inches
Depth 51  inches
Lubricant Flood type unit built into the machine (Electric)
Voltage Available 110-volt single phase  
A qualified Electrician should wire machine to main service.
AMP 20-amp service for 110-volt machine
Compressed Air N/A (Clean, dry)
Operating Temperature No special operating temperature level
Cutting Capacities
Degree ROUND SQUARE FLAT
90 Degrees 7 inches 7 inches 7-3/4  inches x 6  inches
45 Degrees 4-1/2   inches 4-3/8  inches 5  inches x 4-3/8  inches
60 Degrees 2-3/4  inches  2-3/4 inches 2-3/4  inches x 2-3/4  inches

 

ADDITIOPNAL FEATURES
  • Heavy duty, low production saw, comes with one standard Bi-metal blade.
  • Manual down feed with manual return. (Spring assist)
  • Powerful, flame tempered, manual clamping vise. Hand wheel adjusted with quick release cam lever for rapid vise opening and closing action. The vise clamps material firmly.
  • Ergonomic designed for operators comfort and control
  • Gearbox is direct bolted to the bow for less vibration, and positive drive with 40:1 gear ratio. Casting are filled and sanded for added cosmetic value
  • Gear box is direct driven via steel and bronze gears, no belts and pulleys  to contend with
  • CE Certified electronics. Low voltage switches.  Thermo over load protection, low voltage protection with low voltage trigger motor start switch and blade cover interlock
  • Miters up to 60 Degrees right.  Mitering set up is fast and precise with scribed scale for all angles on head pivot. The head turns-the material doesnt.
  • Tapered roller bearing are used in the pivot point of the machine for  smooth and dependable operation
  • Horizontally mounted guide arms for more rigidity and straightest cuts. Guides are rollers with carbide inserts that are fully adjustable and replaceableBlade tensioning is done mechanically with preset, this takes the guess work out of achieving proper blade tensioning
  • Electric coolant pump and self contained coolant system
  • Steel fabricated base
  • One gallon of coolant, and stock stop gauge

 

 
ZIP 29

Unique design makes this bandsaw a real problem solver and an exceptional value.These Johnson mitering horizontal bandsaws will miter up to 60 degrees to the right, and anywhere in between. They also feature head down feed, multimode cutting, quick set cam-activated vises, direct drive, and a heavy cast head frame.

Click to download manual

Features  
  • Head down feed is gravity fed and controlled by way of an infinitely variable flow control valve (except Zip 22). The flow control allows for presetting the down feed rate and retaining this setting at the end of the cut, to minimize dead air cutting.
  • Heavy cast head frame for rigidity and roller and carbide guides for optimum cutting quality. Easily set the most appropriate blade and head descend speed according to the stock material, size and shape for maximum efficiency.
  • Drive system. Direct drive means full power to the drive wheel without horse power loss through belts and pulleys. Low maintenance without belts and pulleys.
  • Multimode features allow three different cutting modes (except Zip 22): 1. Manual mode 2. Manual mode with hydraulic down feed regulation 3. Automatic down feed
  • Quick set cam-activated vises. Adjustable vise with handwheel for initial set up and quick release cam lever for repeat cutting. Vise on the Trad 300 model is gib adjustable.
  • Miter up to 60 degrees to the right, and anywhere in between. The head, NOT the material, rotates for angle cutting. (Trad 301 will miter up to 45 degrees left.)
Standard Equipment  
  • Fabricated oversize steel base
  • Vises Quick set cam action type
  • Combination guides  Roller and carbide
  • CE certified electrical  Low voltage controls, thermo overload, low voltage coil
  • Mechanical blade tensioning Blade breakage shut off (except Zip 22)
  • Stock stop
  • Multimode feature (except Zip 22)
  • Coolant Pump Electric with flow control
  • Head feed  Hydraulic regulated head down feed rate (except Zip 22)
  • Direct drive gear box
  • Door interlocks and end-of-cut shut off
  • Adjustable manual head return
  • Material support roller
Specifications
Part Number 974027-2
Machine Type Manual feed horizontal mitering band saw
Blade Size 96-½ inches x 1 inch
Blade Speeds 2 speed
Min/Max Feet Per Minute 105/210 F.P.M.
Head Feed Manual/Gravity/Hydraulic down feed with spring assisted return
Vise Manual with quick release
Miter Cutting Capabilities Up to 60 degree right
Controls CE Certified 24-volt
Horsepower 2 h.p.
Weight 474 lbs
Work Height 38-1/2 inches
Overall Height 63 inches
Base Width 29-1/2 inches
Depth 55 inches
Lubricant Flood type unit built into the machine (Electric)
Voltage 220 volt -3 phase
AMP 20-amp service for 230-volt machine
16-amp service for 460-volt machine
Compressed Air N/A (Clean, dry)
Operating Temperature No special operating temperature level
CUTTING CAPACITIES
Degree ROUND SQUARE FLAT
90 degrees 8-3/4  inches 7-7/8 inches 9 3/8 inches x 6-1/4 inches
45 degrees right 6-1/4 inches 5-1/2 inches 6 inches x 4-1/2 inches
60 degrees  right 3-1/2 inches  3-1/2 inches 3-1/2 inches x 4 inches
ADDITIONAL FEATURES
  • Heavy duty, low production saw, comes with one standard Bi-metal blade.
  • Manual down feed with manual return. (Spring assist)  
  • Powerful, flame tempered, manual clamping vise. Hand wheel adjusted with quick release cam lever for rapid vise opening and closing action. The vise clamps material firmly.
  • Ergonomic designed for operators comfort and control.
  • Gearbox is direct bolted to the bow for less vibration, and positive drive with 40:1 gear ratio. Casting are filled and sanded for added cosmetic value.
  • Gear box is direct driven via steel and bronze gears, no belts and pulleys  to contend with.
  • CE Certified electronics. Low voltage switches.  Thermo over load protection, low voltage protection with low voltage trigger motor start switch and blade cover interlock
  • Miters up to 60 degree right.  Mitering set up is fast and precise with scribed scale for all angles on head pivot. The head turns-the material does not
  • Tapered roller bearing are used in the pivot point of the machine for  smooth and dependable operation. 
  • Horizontally mounted guide arms for more rigidity and straightest cuts. Guides are rollers with carbide inserts that are fully adjustable and replaceable.
  • Blade tensioning is done mechanically with preset, this takes the guess work out of achieving proper blade tensioning. 
  • Electric coolant pump and self contained coolant system.
  • Steel fabricated base.
  • One gallon of coolant, and stock stop gauge.

 

 

Unique design makes this bandsaw a real problem solver and an exceptional value.These Johnson mitering horizontal bandsaws will miter up to 60º to the right, and anywhere in between. They also feature head down feed, multimode cutting, quick set cam-activated vises, direct drive, and a heavy cast head frame.
Model TRAD301 shown.

Click to download manual

Features

  • Head down feed is gravity fed and controlled by way of an infinitely variable flow control valve (except Zip 28). The flow control allows for presetting the down feed rate and retaining this setting at the end of the cut. To minimize dead air cutting,
  • Heavy cast head frame for rigidity and roller and carbide guides for optimum cutting quality. Easily set the most appropriate blade and head descend speed according to the stock material, size and shape for maximum efficiency.
  • Drive system. Direct drive means full power to the drive wheel without horse power loss through belts and pulleys. Low maintenance without belts and pulleys.
  • Multimode features allow three different cutting modes (except Zip 28): 1. Manual mode 2. Manual mode with hydraulic down feed regulation 3. Automatic down feed
  • Quick set cam-activated vises. Adjustable vise with handwheel for initial set up and quick release cam lever for repeat cutting. Vise on the Trad 300 model is gib adjustable.
  • Miter up to 60º to the right, and anywhere in between. The head, NOT the material, rotates for angle cutting. (Trad 301 will miter up to 45º left.)

Standard Equipment

  • Fabricated oversize steel base
  • Vises Quick set cam action type
  • Combination guides Roller and carbide
  • CE certified electrical Low voltage controls, thermo overload, low voltage coil
  • Mechanical blade tensioning Blade breakage shut off (except Zip 28)
  • Stock stop
  • Multimode feature (except Zip 28)
  • Coolant Pump Electric with flow control
  • Head feed Hydraulic regulated head down feed rate (except Zip 28)
  • Direct drive gear box
  • Door interlocks and end-of-cut shut off
  • Adjustable manual head return
  • Material support roller
Specifications
model
TRAD301
TRAD301
number
voltage
220-volt 3 ph
420-volt 3 ph
maximum blade size
108-1/4x1
108-1/4x1
motor horsepower
1.3/2
1.3/2
blade speeds
108/216
108/216
weight (lbs) 970 970
solid round 90 capacity (inches) 10 10
solid round 45 right capacity (inches)
7-1/2
7-1/2
solid round 60 right capacity (inches)
4-1/4
4-1/4
solid square 9- capacity (inches)
9-3/4
9-3/4
solid square 45 right capacity 7 7
solid square 60 right capacit...
4-1/3
4-1/3
solid rectangle 90 capacity (inches)
11-3/4x7
11-3/4x7
solid rectangle 45 right capa...
7-1/2x6-5/8
7-1/2x6-5/8
solid rectangle 60 right capa...
4-1/4x5-7/8
4-1/4x5-7/8
A work table height 37 37
B height 77 77
C floor space left to right 47 47
D floor space front to back 79 79
Accessories
20000-00 Casters (set of 3)
10560-00 Coolant Attachment
20200-00 Stock Stand
10590-00 24 inch Discharge Table
716545 60 inch Roller Table

 

974026-1
MODEL ZIP 22 - DAKE MITERING HORIZONTAL BANDSAWS - 8 MAX VISE OPENING MITERING BANDSAW 110V-1 PH ** WEIGHT - 397LBS
Mfg. item #: 974026-1
DAKE974026-1
lease to own for as little as:$62 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$3,120.00

169
974027-2
MODEL ZIP 29 - DAKE MITERING HORIZONTAL BANDSAWS - 8-3/4 ROUNDS, 9-3/8X6-1/4 FLATS - 220V-3 PH (ADD $675 FOR 440V) ** WEIGHT - 475LBS
Mfg. item #: 974027-2
DAKE974027-2
lease to own for as little as:$105 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$5,263.78

169
974023-2
MODEL TRAD 301 - DAKE MITERING HORIZONTAL BANDSAWS - 8-3/4 ROUNDS, 11-3/4X8 FLATS - 220V-3 PH (ADD $675 FOR 440V) ** WEIGHT - 1035LBS
Mfg. item #: 974023-2
DAKE974023-2
lease to own for as little as:$187 per month!
Call for freight quote on this item or we will confirm freight charges before shipping.1
$9,360.96

169
300674
440 VOLT TRANSFORMER
Mfg. item #: 300674
DAKE300674
FREE shipping when ordered with a machine from this manufacturer.20
$648.00

169
20000-00
Mfg. item #: 20000-00
DAKE20000-00
FREE shipping when ordered with a machine from this manufacturer.20
$95.00

169
10560-00
Mfg. item #: 10560-00
DAKE10560-00
FREE shipping when ordered with a machine from this manufacturer.20
$686.40

169
20200-00
Mfg. item #: 20200-00
DAKE20200-00
FREE shipping when ordered with a machine from this manufacturer.20
$584.88

169
10590-00
Mfg. item #: 10590-00
DAKE10590-00
FREE shipping when ordered with a machine from this manufacturer.20
$285.00

169
716545
Mfg. item #: 716545
DAKE716545
FREE shipping when ordered with a machine from this manufacturer.20
$350.00

169
Copyright © 2017 Smith-Hamilton, Inc
0.008 160721 14:19