Technical Sales 1–800–458–3687

General Equipment Long Reach Tool


 

MDF15 PNEMUMATIC LONG REACH AIR TOOL MDF15 PNEMUMATIC LONG REACH AIR TOOL MDF15 PNEMUMATIC LONG REACH AIR TOOL

 

PNEUMATIC AIR TOOLS

General's pneumatically powered, MDF Series Long Reach Air Tools are intended for removing surface coatings and other surface preparation tasks. The MDF15 features an aluminum housing, with the lighter weight making it ideal for removing materials from vertical walls or overhead applications. The extra blow force of the larger and heavier MDF35 gives it the power necessary for removing concrete or coating materials in limited access areas. A wide variety of chisel configurations are available for either unit. Both tools will operate satisfactorily from a high output, gasoline-powered compressor.

MDF15 PNEMUMATIC LONG REACH AIR TOOL

Lightweight, Aluminum construction, pneumatically powered air tools, hand operated, designed for a wide variety of surface preparation projects. Work fast and easy for removing vinyl and ceramic tiles, carpet adhesives and material build-ups from floors and walls. Small size and high power output make them useful for chipping away concrete and asphalt or removing slag and scale materials on industrial and marine job sites. 55-1/2 inch overall length without accessory tool.

  • Aluminum barrel construction
  • 3,700 blows per minute
  • .371 hexagon shank (round retainer)
  • 55-1/2 inch over all length

MDF35 PNEMUMATIC LONG REACH AIR TOOL

Steel construction, pneumatically powered air tools, hand operated, designed for a wide variety of surface preparation projects. Work fast and easy for removing vinyl and ceramic tiles, carpet adhesives and material build-ups from floors and walls. Small size and high power output make them useful for chipping away concrete and asphalt or removing slag and scale materials on industrial and marine job sites. 55-1/2 inch overall length without accessory tool.

  • Steel barrel construction
  • 3,100 blows per minute
  • .580 hexagon shank (round retainer)
  • 55-1/2 inch over all length

Download PDF File

MDF Series Long Reach Air Tools Operator Manual

MDF15 PNEMUMATIC LONG REACH AIR TOOL

Specifications:


PISTON BORE: .72 inch (18.5 mm)
PISTON STROKE: 1.77 inch (45 mm)
RATED AIR PRESSURE: 90 PSI
OPERATING AIR PRESSURE RANGE: 60 to 90 PSI (400-600 kPa)
RATED AIRE CONSUMPTION: 6 CFM (3.0 lit/sec.)
CONNECTING HOSE CONFIGURATION: 3/8 inch (9.5 mm) diameter, 60 inch (1524 mm) nominal length
BAREL CONSTRUCTION: Aluninum
ACCESSORY CONNECTION TYPE: .371 inch Hexagon

 




MDF35 PNEMUMATIC LONG REACH AIR TOOL

Specifications:


PISTON BORE: .87 inch (32 mm)
PISTON STROKE: 1.97 inch (50 mm)
RATED AIR PRESSURE: 90 PSI
OPERATING AIR PRESSURE RANGE: 60 to 90 PSI (400-600 kPa)
RATED AIRE CONSUMPTION: 10 CFM (5.0 lit/ sec.)
CONNECTING HOSE CONFIGURATION: 3/8 inch (9.5 mm) diameter, 60 inch (1524 mm) nominal length
BAREL CONSTRUCTION: Steel
ACCESSORY CONNECTION TYPE: .580 inch Hexagon

PNEUMATIC AIR TOOLS

General's pneumatically powered, MDF Series Long Reach Air Tools are intended for removing surface coatings and other surface preparation tasks. The MDF15 features an aluminum housing, with the lighter weight making it ideal for removing materials from vertical walls or overhead applications. The extra blow force of the larger and heavier MDF35 gives it the power necessary for removing concrete or coating materials in limited access areas. A wide variety of chisel configurations are available for either unit. Both tools will operate satisfactorily from a high output, gasoline-powered compressor.

MDF15 PNEMUMATIC LONG REACH AIR TOOL

Lightweight, Aluminum construction, pneumatically powered air tools, hand operated, designed for a wide variety of surface preparation projects. Work fast and easy for removing vinyl and ceramic tiles, carpet adhesives and material build-ups from floors and walls. Small size and high power output make them useful for chipping away concrete and asphalt or removing slag and scale materials on industrial and marine job sites. 55-1/2 inch overall length without accessory tool.

  • Aluminum barrel construction
  • 3,700 blows per minute
  • .371 hexagon shank (round retainer)
  • 55-1/2 inch over all length

 

MDF15 - LONG REACH AIR TOOL & ACCESSORIES
MDF15 TOOL, AIR, REACH, LONG
MDF15-1100 MOILPOINT, .371HEX
MDF15-1200 CHISEL, 1W, .371HEX
MDF15-1400 CHISEL, 4W, .371HEX45.00
MDF15-1500 KIT, TOOL, ACCESSORY

 

MDF35 PNEMUMATIC LONG REACH AIR TOOL

Steel construction, pneumatically powered air tools, hand operated, designed for a wide variety of surface preparation projects. Work fast and easy for removing vinyl and ceramic tiles, carpet adhesives and material build-ups from floors and walls. Small size and high power output make them useful for chipping away concrete and asphalt or removing slag and scale materials on industrial and marine job sites. 55-1/2 inch overall length without accessory tool.

  • Steel barrel construction
  • 3,100 blows per minute
  • .580 hexagon shank (round retainer)
  • 55-1/2 inch over all length
MDF35 LONG REACH AIR TOOL & ACCESSORIES
MDF35 TOOL, AIR, REACH, LONG
MDF35-1600KIT PACKAGE, BLADE, SCRAPER, 5.5W
MDF35-1610KIT PACKAGE, BLADE, SCRAPER, 8W
MDF35-1620KIT PACKAGE, BLADE, SCRAPER, 12W
MDF35-1700 KIT, TOOL, ACCESSORY
MDF35-1800 KIT, TOOL, REMOVAL, COATINGS

 

MDF Long Reach Air Tools and Accessories
Model MDF15 - Long Reach Air Tools and Accessories
MDF15 TOOL, AIR, REACH, LONG
MDF15-1100 MOILPOINT, .371HEX
MDF15-1200 CHISEL, 1W, .371HEX
MDF15-1400 CHISEL, 4W, .371HEX45.00
MDF15-1500 KIT, TOOL, ACCESSORY
Model MDF35 - Long Reach Air Tools and Accessories
MDF35 TOOL, AIR, REACH, LONG
MDF35-1700 KIT, TOOL, ACCESSORY
MDF35-1800 KIT, TOOL, REMOVAL, COATINGS

 

LIMITED PRODUCT WARRANTY

GENERAL EQUIPMENT COMPANY makes the following limited warranty to the original purchaser of each new and unused light construction equipment product:

GENERAL EQUIPMENT COMPANY MAKES NO WARRANTY THAT THE LIGHT CONSTRUCTION PRODUCTS SOLD HEREUNDER SHALL BE MERCHANTABLE OR THAT SUCH PRODUCTS SHALL BE FIT FOR ANY PARTICULAR PURPOSE AND THERE ARE NO WARRANTIES EXPRESSED OR IMPLIED MADE OTHER THAN ITS STANDARD, LIMITED WARRANTY.

WHAT THE LIMITED WARRANTY COVERS

GENERAL EQUIPMENT COMPANY warrants that each new and unused light construction equipment product and or accessory product sold by it: A) to be free from defects in material and workmanship under normal use/service for a period of two (2) years from date of purchase: B) to warrant the labor expenses associated with defects in material and workmanship for a period of one (1) year from date of purchase. The obligation under this warranty being limited to current flat labor rates and the replacement and/or repair at its Owatonna, Minnesota, factory site, or at an authorized dealer designated by it, of such part or parts as shall appear upon inspection to have been defective in material or workmanship at the time sold, provided that the part or parts claimed defective are returned to the inspection point, transportation charges prepaid. At the time of requesting warranty service, the purchaser must present evidence of the purchase date of the part or parts submitted for warranty inspection.

The only remedies the purchaser has in connection with the breach of performance of any warranty for the light construction equipment products sold by GENERAL EQUIPMENT COMPANY are those set forth in this document. In no event will GENERAL EQUIPMENT COMPANY, its authorized dealer or representative, or any company affiliated with GENERAL EQUIPMENT COMPANY be held liable for any incidental or consequential damages or injuries.

WHAT THE LIMITED WARRANTY DOES NOT COVER

This warranty does not cover depreciation or damage caused by: normal wear, accident, improper protection in storage, improper use, alterations, tampering, the environment, improper maintenance, lack of maintenance or incidental costs incurred by the original purchaser while the light construction equipment product is being examined and or repaired under warranty. In addition to the above limitations and/or exclusions, the following basic product components are not covered by the limited warranty:

1) Parts and/or components subject to wear with normal usage, but not specifically limited to the following:

a) High impact/wear related components including, but not limited to: V-belts, flails, flail rods and flail drums.
b) High abrasion/wear related components including, but not limited to: augers, auger flighting and boring heads.
c) Engine throttle control cable assembly and related control devices.
d) Centrifugal clutch components including, but not limited to: shoes, springs, drum and motor assembly.

2) Parts and labor for scheduled and general maintenance services as defined in the applicable Operator Manual.

3) Engines, motors, controls and other accessories sold with, attached to, or operated with a light construction equipment product sold by GENERAL EQUIPMENT COMPANY and warranted separately by the Original Equipment Manufacturer (OEM) per its respective warranty program. Contact the Customer Service Department of GENERAL EQUIPMENT COMPANY for assistance in obtaining specific OEM warranty coverage.

This limited warranty gives you specific legal rights and may also have other rights which may vary from state to state. Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages. These limitations may not apply to the original purchaser.

MDF15
CALL 800-458-3687 X1 FOR PRICING - CALL FOR PRICING
Mfg. item #: MDF15
GENMDF15
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

850
MDF35
Mfg. item #: MDF35
GENMDF35
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

850
MDF15-1100
MOILPOINT, .371HEX
Mfg. item #: MDF15-1100
GENMDF15-1100
Call for freight quote on this item or we will confirm freight charges before shipping.1
$31.69

182
MDF15-1200
CHISEL, 1W, .371HEX
Mfg. item #: MDF15-1200
GENMDF15-1200
Call for freight quote on this item or we will confirm freight charges before shipping.1
$31.69

182
MDF15-1400
CHISEL, 4W, .371HEX
Mfg. item #: MDF15-1400
GENMDF15-1400
Call for freight quote on this item or we will confirm freight charges before shipping.1
$56.86

182
MDF15-1500
KIT, TOOL, ACCESSORY, NLA
Mfg. item #: MDF15-1500
GENMDF15-1500
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

182
MDF35-1700
KIT, TOOL, ACCESSORY, NLA
Mfg. item #: MDF35-1700
GENMDF35-1700
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

182
MDF35-1800
KIT, TOOL, REMOVAL, COATINGS, NLA
Mfg. item #: MDF35-1800
GENMDF35-1800
Call for freight quote on this item or we will confirm freight charges before shipping.1
Call for Price

182
Copyright © 2024 Smith-Hamilton, Inc
0.007 190816 15:18