chat now with southern tool
Technical Sales 1–800–458–3687

General Equipment SP8/E5HP Surface Plane

SP8/E5HP Surface Planer

The model SP8/E5HP Surface Planer is powered by a 5 hp, TEFC electric motor designed to operate from 230 VAC/60 Hz and 220 VAC/50 Hz power sources. An integral thermal protection switch protects the motor by stopping it in the event of excessive internal heat. Additional features include standard 8 inch wide drum cutting width, full length hexagon driveshaft configuration, dual V belt drive system and high capacity, twin row, sealed ball bearings. A full line of available flail configurations allow the SP8/E5HP Surface Planer to perform multi tasked job functions including: removing traffic lines from floors, reducing trip and fall hazards from floor joints and preparing surfaces for top coat applications.

Series II Surface Planer
ENGINE SP8/E5HP
Type Lesson 5/4.4 hp (3.7/3.1 kW) totally enclosed, fan cooled, capacitor stsrt, 3450/2850 RPM, single phase,230/220 Vac, 60/50 hz electric motor. Voltage and frequency are controlled automatically by motor.
Fuel Specification n/a
Starting Method n/a
Air Cleaner n/a
Electric Motor Full Loaded Amperage (FLA) Rating 21 amperes at 230 VAC, 60 hz
23 amperes at 220 VAC, 50 hz
Electric Motor Starting Power Required (SPR) Rating. (SPR) = (FLA) x 5 Factor 105 amperes at 24.2 kW at 230 VAC, 60 hz

115 amperes at 25.63 kW at 220 VAC, 50 hz

Minimum Circuit Beaker Amperage Required 30 amperes at 230 VAC, 60 hz
30 amperes at 2230 VAC, 50 hz
Rated Free Air Consumptionn/a n/a
FRAME  
Structure Unitized, welded steel plate
Drive System 3V Series twin belt and pulley
Drive shaft Configuration 13/16" (21 mm) full length hexagon
Bearings High capacity, double row, externally greased Zerk®type fittings
Cutting Depth Adjustment Screw type, positive locking, with drum height control lever
Maximum Cutting Depth 5/8" (16 mm)
maximum Cutting Width 8" (203 mm)
Minimum Cutting Distance To Vertical Wall 3 1/4" (83 mm)
Dust Port Connection 3" (76 mm) diameter, front mounted
GENERAL  
Width 17 3/4" (451 mm)
Height (At Maximum Cutting Depth) 39 1/2" (1003 mm)
Length (At maximum Cutting depth) 39 1/4" (997 mm)
Weight (Less Drum and Flail kit) 242 lbs. (110 kg)
There are no further details.
There are no further specifications.
There is no further information.
There are no listed accessories.

smith hamilton circa 1926
  • Hours: Monday - Friday
    8:00 AM to 7:00 pm ET
  • Toll Free:
    1-800-458-3687
  • International:
    786-866-9865
  • Fax:
    865-376-9792
  •  
Copyright © 2017 Smith-Hamilton, Inc
0.003 150419 18:39