chat now with southern tool
Technical Sales 1–800–458–3687

General Equipment SP8/G Surface Planer

SP8/G Surface Planer

General's SP8/G...high speed, accurate surface preparation up to 8 inches wide and 5/8 inches deep.

The SP8/G Surface Planer utilizes a wide variety of flail type cutters to hammer and impact almost any type of surface. The desired effect is controlled by both flail selection and spacing. Wheels located directly behind the drum allow the SP8/G to cut through high spots and irregularities on slab surfaces. Precise weight and balance enhance operator control and machine maneuverability.

The SP8/G is ideal for milling misaligned sidewalks and joints, and removing encrusted accumulations on floors to improve working conditions and safety. Specially designed tungsten carbide insert flails effectively remove thermoplastic and cold plastic type markings from roadways.

A heavy, welded frame and extra capacity ball bearings make the hard working SP8/G very cost effective and reliable. Other standard features include a screw type, cutting depth control, water mist dust control, fitting and vacumn attachment tube.

Series II Surface Planer
ENGINE SP8/G
Type Various industrial quality, 5 hp (3.7 kW) category at 3600 RPM, 4-cycle gasoline engine equipped with Lo Tone muffler and spark arrestor.
Fuel Specification Gasoline, regular or unleaded
Starting Method Mechanical rewind
Air Cleaner Dual element/Cyclone® type
Electric Motor Full Loaded Amperage (FLA) Rating n/a
Electric Motor Starting Power Required (SPR) Rating. (SPR) = (FLA) x 5 Factor n/a
Minimum Circuit Beaker Amperage Required n/a
Rated Free Air Consumptionn/a n/a
FRAME  
Structure Unitized, welded steel plate
Drive System 3V Series twin belt and pulley
Drive shaft Configuration 13/16" (21 mm) full length hexagon
Bearings High capacity, double row, externally greased Zerk®type fittings
Cutting Depth Adjustment Screw type, positive locking, with drum height control lever
Maximum Cutting Depth 5/8" (16 mm)
maximum Cutting Width 8" (203 mm)
Minimum Cutting Distance To Vertical Wall 3 1/4" (83 mm)
Dust Port Connection 3" (76 mm) diameter, front mounted
GENERAL  
Width 17 1/2" (419 mm)
Height (At Maximum Cutting Depth) 39 1/2" (1003 mm)
Length (At maximum Cutting depth) 39 1/4" (997 mm)
Weight (Less Drum and Flail kit) 170 lbs. (77.3 kg)
There are no further details.
There are no further specifications.
There is no further information.
There are no listed accessories.

smith hamilton circa 1926
  • Hours: Monday - Friday
    8:00 AM to 7:00 pm ET
  • Toll Free:
    1-800-458-3687
  • International:
    786-866-9865
  • Fax:
    865-376-9792
  •  
Copyright © 2017 Smith-Hamilton, Inc
0.002 150419 18:39