General Equipment SP8/G Surface Planer
SP8/G Surface Planer
General's SP8/G...high speed, accurate surface preparation
up to 8 inches wide and 5/8 inches deep.
The SP8/G Surface Planer utilizes
a wide variety of flail type cutters to hammer and impact
almost any type of surface. The desired effect is controlled
by both flail selection and spacing. Wheels located directly
behind the drum allow the SP8/G to cut through high spots
and irregularities on slab surfaces. Precise weight and
balance enhance operator control and machine
maneuverability.
The SP8/G is ideal for milling
misaligned sidewalks and joints, and removing encrusted
accumulations on floors to improve working conditions and
safety. Specially designed tungsten carbide insert flails
effectively remove thermoplastic and cold plastic type
markings from roadways.
A heavy, welded frame and extra
capacity ball bearings make the hard working SP8/G very cost
effective and reliable. Other standard features include a
screw type, cutting depth control, water mist dust control,
fitting and vacumn attachment tube. |
Series
II Surface Planer |
ENGINE |
SP8/G |
Type |
Various industrial quality, 5 hp (3.7 kW)
category at 3600 RPM, 4-cycle gasoline engine
equipped with Lo Tone muffler and spark
arrestor. |
Fuel Specification |
Gasoline, regular or
unleaded |
Starting Method |
Mechanical rewind |
Air Cleaner |
Dual element/Cyclone®
type |
Electric Motor Full Loaded Amperage (FLA) Rating |
n/a |
Electric Motor
Starting Power Required (SPR) Rating. (SPR) = (FLA)
x 5 Factor |
n/a |
Minimum Circuit Beaker Amperage Required |
n/a |
Rated Free Air
Consumptionn/a |
n/a |
FRAME |
|
Structure |
Unitized, welded
steel plate |
Drive System |
3V
Series twin belt and pulley |
Drive shaft
Configuration |
13/16" (21 mm) full
length hexagon |
Bearings |
High capacity, double row, externally greased
Zerk®type fittings |
Cutting Depth
Adjustment |
Screw type, positive
locking, with drum height control lever |
Maximum Cutting Depth |
5/8" (16 mm) |
maximum Cutting Width |
8" (203 mm) |
Minimum Cutting Distance To Vertical Wall |
3
1/4" (83 mm) |
Dust Port Connection |
3" (76 mm) diameter,
front mounted |
GENERAL |
|
Width |
17 1/2" (419 mm) |
Height (At Maximum Cutting Depth) |
39
1/2" (1003 mm) |
Length (At maximum
Cutting depth) |
39 1/4" (997 mm) |
Weight (Less Drum and Flail kit) |
170
lbs. (77.3 kg) |
|
There are no further details.
There are no further specifications.
There is no further information.
There are no listed accessories.
Copyright © 2021 Smith-Hamilton, Inc 0.001 150419 18:39
| |