Technical Sales 1–800–458–3687

JET JBTS-10MJS - 10 inch Jobsite Table Saw

JBTS-10MJS, 10 inch Jobsite Table Saw w/ Stand

707000

If you're looking for a jobsite saw that's both powerful and portable, look no further than the all-new JET B3NCH 10 inch Jobsite Table Saw with stand. This table saw features a 15 Amp soft start motor, 25 inch right rip capacity, a riving knife and anti-kickback pawls for added safety, and a heavy-duty folding stand with wheels for quick setup and portability. Weighing in at just under 100lbs, this powerhouse brings the stability of a stationary table saw to your jobsite, then rolls away when you're done.
 
  • Easy folding stand for convenient storage, quick setup and portability on the job site
  • Rubber hand grips on each end of the table allow you to conveniently carry without stand
  • Unique base design allows for adequate tool storage on the job site
  • Heavy Duty 15 Amp motor with soft start
  • Large telescoping extension wing provides a wide 25 inch ripping capacity
  • Unique dust shroud design enhances dust and chip removal
  • Aluminum extruded rails ensure a square fence and sliding precision
  • Rear extension provides out feed support and keeps the work piece flat
  • Riving knife system reduces chance of kickback
  • Convenient push button arbor lock allows for easy and quick blade change
  • Quick-lock fence slides smoothly and locks securely for accurate cuts

 

Part Number 707000  
Blade Diameter 10 inch
Arbor Diameter 5/8 inch
Arbor Speed 4000 RPM
Maximum Depth of Cut 3 1/16 inch
Maximum Depth of Cut at 45 Degrees 2-1/2 inch
Maximum Rip Right of Blade 25 inch
Maximum Width of Dado 5/32 inch
Maximum Diameter of Dado 10 inch
Table Size with Standard Extension (L x W) 30 1/4 x 21 25/32 inch
Table Size without Extension (L x W) 24 x 21 25/32 inch
Dust Port Outside Diameter 2-1/2 inch
Motor Voltage 120 V  
Prewired Voltage 120 V
Motor Current 15 A  
Motor Phase 1 Ph
Model Number JBTS-10MJS  
Brand Jet  
Height 20 inch
Width 31.7 inch
Length 45.5 inch
Net Weight 90.39 pound

 

5 YEAR WARRANTY

Warranty and Service

Walter Meier Manufacturing Americas warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these Walter Meier Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET or Wilton tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.

More Information

Walter Meier Manufacturing Americas is consistently adding new products to the line. For complete, up-to-date product information, check with your local Walter Meier distributor or this website.

Warranty

JET products carry a limited warranty which varies in duration based upon the product.


What is Covered

This warranty covers any defects in workmanship or materials subject to the exceptions stated below. Cutting tools, abrasives and other consumables are excluded from warranty coverage.

Who is Covered

This warranty covers only the initial purchaser of the product.

What is the Period of Coverage

The general JET and Wilton warranty lasts for the time period specified in the product literature of each product.

What is Not Covered

Five Year Warranties do not cover woodworking (WW) products used for commercial, industrial or educational purposes. Woodworking products with Five Year Warranties that are used for commercial, industrial or education purposes revert to a One Year Warranty. This warranty does not cover defects due directly or indirectly to misuse, abuse, negligence or accidents, normal wear-and-tear, improper repair or alterations, or lack of maintenance.

How to Get Service

The product or part must be returned for examination, postage prepaid, to a location designated by us. For the name of the location nearest you, please call 1-800-274-6848.

You must provide proof of initial purchase date and an explanation of the complaint must accompany the merchandise. If our inspection discloses a defect, we will repair or replace the product, or refund the purchase price, at our option.

We will return the repaired product or replacement at our expense unless it is determined by us that there is no defect, or that the defect resulted from causes not within the scope of our warranty in which case we will, at your direction, dispose of or return the product. In the event you choose to have the product returned, you will be responsible for the shipping and handling costs of the return.

How State Law Applies

This warranty gives you specific legal rights; you may also have other rights which vary from state to state.

Limitations on This Warranty

WALTER MEIER LIMITS ALL IMPLIED WARRANTIES TO THE PERIOD OF THE LIMITED WARRANTY FOR EACH PRODUCT. EXCEPT AS STATED HEREIN, ANY IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS ARE EXCLUDED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG THE IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.

WALTER MEIER SHALL IN NO EVENT BE LIABLE FOR DEATH, INJURIES TO PERSONS OR PROPERTY, OR FOR INCIDENTAL, CONTINGENT, SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF OUR PRODUCTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

JBTS-10MJS, 10 inch Jobsite Table Saw w/ Stand
707000 JBTS-10MJS, 10 inch Jobsite Table Saw w/ Stand
707001 JET 10 inch Tablesaw Dado Insert

 

oliver 0812 Circular blade sharpener

Finally, a sharpener for every home shop that will make your cutting job more efficient and easier at anytime and anywhere. All you need is the 0812 Circular Blade

Sharpener and a hand grinder with our included diamond grinding wheel, and you can save your workshop upkeep and have your blades in prime condition for efficiency and safety assurance.

Easy to use and almost hands free grinding allows you to
configure the sharpener to work with blades from 7.5 to 12 inch in diameter with 5/8 or 1 inch arbor.

Packaging Size

  • NW/GW: 24lbs/26.5lbs
  • 10 x 20 x 18.5 inch
  • 4 inch Angle grinder required for use
    (Not Included)

Features:

  • Sharpens circular saw blades from 7.5 to 12 inch diameter.
  • Portable compact design.
  • Sturdy die casting iron base.
  • 4 inch diamond blade included
  • Suitable for regular blades and carbide tip blades.
  • 2 Year Limited Warranty

Oliver cicular saw blade sharpener
812 Circular Saw Blade Sharpener

 

707000
JBTS-10MJS, 10 BENCH TOP JOBSITE TABLESAW WITH RETRACTABLE STAND
Mfg. item #: 707000
WMH707000
Expedited shipping at no additional cost when ordered with a Jet, Powermatic or Wilton machine.1020
$738.27

1308
707001
Mfg. item #: 707001
WMH707001
Expedited shipping at no additional cost when ordered with a Jet, Powermatic or Wilton machine.1019
$26.12

305
812
SAW BLADE SHARPENER ** SHIPPING WEIGHT = 20 LBS
Mfg. item #: 812
OLV812
FREE shipping when ordered with a machine from this manufacturer.20
$249.99

786
Copyright © 2021 Smith-Hamilton, Inc
0.004 191001 12:01