Technical Sales 1–800–458–3687

Huth Tooling and Dies

die package

010 Die Package Tooling
Radius Dies
No. Radius Size
5200 * 5 in 2 in
5414 5 in 2-1/4 in
5412 5 in 2-1/2 in
4112 4 in 1-1/2 in
4134 4 in 1-3/4 in
4200 4 in 2 in
4414 4 in 2 1/4 in
3200 3 in 2 in
Back Shoes
No. Pcs. Size
1112 2 1-1/2 in
1134 2 1-3/4 in
1200 2 2 in
4211 2 2-1/4 in
4412 2 2-1/2 in

 
Half shoes
No. Size
1038 1-1/2 in
1040 1-3/4 in
1045 2 in
4416 2-1/4 in
4410 2-1/2 in
Collet Sets
No. Size
1712 1-1/2 in
1734 1-3/4 in
1720 2 in
1725 2-1/4 in
1750 2-1/2 in
Ball Joint Tooling
No. Size
555 1-3/4, 1-7/8, 2 in Female
556 2-1/4, 2-1/2 in Female
Arbor
No. Size
508 1-1/2 to 4 in
498 Tip: 1-1/2 to 1-3/4 in
499 Tip: 1-3/4 to 4 in
Segment Sets
No. Size
473 1-1/2 to 1-3/4 in
474 1-3/4 to 2-1/8 in
475 2-1/8 to 2-1/2 in
Accessories
No. Description
815 Die Holder
816 Die Holding Pin
835 Tube Cutter
853 1-1/2 to 3-1/2 in - Flaring/Flanging Tool
855 Die pins (25)

 

die package

011 Die Package Tooling
Radius Dies
No. Radius Size
5530 * 5 in 3 in
5200 * 5 in 2 in
5414 * 5 in 2 1/4 in
5412 5 in 2-1/2 in
4134 4 in 1-3/4 in
4200 4 in 2 in
4414 4 in 2 1/4 in
4409 4 in 2-1/2 in
3112 3 in 1-1/2 in
3134 3 in 1-3/4 in
3200 3 in 2 in
* Requires 41041 retainer
Back Shoes
No. Pcs. Size
1112 2 1-1/2 in
1134 2 1-3/4 in
1200 2 2 in
4211 2 2-1/4 in
4412 2 2-1/2 in
1350 2 3 in
Half shoes
No. Size
1038 1-1/2 in
1040 1-3/4 in
1045 2 in
4416 2-1/4 in
4410 2-1/2 in
Three-Quarter shoes
No. Size
1046 2 in
4413 2-1/4 in
Swage Dies
No. Size
112 1-1/2 in
134 1-3/4 in
178 1-7/8 in
120 2 in
125 2-1/4 in
150 2-1/2 in
Collet Sets
No. Size
1712 1-1/2 in
1734 1-3/4 in
1720DF 2 in
1725 2-1/4 in
1750 2-1/2 in
Ball Joint Tooling
No. Size
555 1-3/4, 1-7/8, 2 in Female
556 2-1/4, 2-1/2 in Female
Ball Joint Segments
419 2 in
420 2-1/4 in
421 2-1/2 in
Flaring Tool
No. Size
518 2 in Double Flare and
1-1/2 in Flat Flare
Arbor
No. Size
508 1-1/2 to 4 in
498 Tip: 1-1/2 to 1-3/4 in
499 Tip: 1-3/4 to 4 in
Segment Sets
No. Size
473 1-1/2 to 1-3/4 in
474 1-3/4 to 2-1/8 in
475 2-1/8 to 2-1/2 in
476 2-1/2 to 3 in
Accessories
No. Description
825 Quick Disconnect Kit
835 Tube Cutter
853 1-1/2 to 3-1/2 in - Flaring/Flanging Tool
855 Die pins (25)
996 Rotation Dial
950 Program Card System
or
980 Program Card System in Electronic Format



 

die package

013 Die Package Tooling
Radius Dies
No. Radius Size
5112 * 5 in 1-1/2 in
5134 * 5 in 1-3/4 in
5820 * 5 in 2 in 180 deg
5824 * 5 in 2 1/4 in 180 deg
5412 * 5 in 2-1/2 in
5530 * 5 in 3 in
4112 4 in 1-1/2 in
4134 4 in 1-3/4 in
4200 4 in 2 in
4414 4 in 2 1/4 in
4409 4 in 2-1/2 in
3112 3 in 1-1/2 in
3134 3 in 1-3/4 in
3200 3 in 2 in
3414 3 in 2-1/2 in
* Requires 41041 retainer
Back Shoes
No. Pcs. Size
1112 2 1-1/2 in
1134 2 1-3/4 in
1200 2 2 in
4211 2 2-1/4 in
4412 2 2-1/2 in
1350 2 3 in
Half shoes
No. Size
1038 1-1/2 in
1040 1-3/4 in
1045 2 in
4416 2-1/4 in
4410 2-1/2 in
1352 3 in
Three-Quarter shoes
No. Size
1036 1-3/4 in
1046 2 in
4413 2-1/4 in
4415 2-1/2 in
1351 3 in
Swage Dies
No. Size
112 1-1/2 in
134 1-3/4 in
178 1-7/8 in
130 3 in
* For 2, 2-1⁄4, 2-1⁄2 in IDs use male ball joint tools 550, 552, 553
Collet Sets
No. Size
1712 1-1/2 in
1734 1-3/4 in
1720 2 in
1725 2-1/4 in
1750 2-1/2 in
1730 3 in
Ball Joint Tooling
No. Size
550 1-3/4 in - Male
552 2 in - Male
553 2-1/4 in Male
554 2-1/2 in Male
555 1-3⁄4, 1-7⁄8, 2 in - Female
556 2-1⁄4, 2-1⁄2 in - Female
557 1-3⁄4 to 2-1⁄2 in - Domer
558 2-1⁄2 to 2-3⁄4 in - Domer
Flaring Segments 45 degrees
No. Size
440 1-1⁄2 to 2-1⁄2 in
Arbor
No. Size
508 1-1/2 to 4 in
498 Tip: 1-1/2 to 1-3/4 in
499 Tip: 1-3/4 to 4 in
Segment Sets
No. Size
473 1-1/2 to 1-3/4 in
474 1-3/4 to 2-1/8 in
475 2-1/8 to 2-1/2 in
476 2-1/2 to 3 in
Accessories
No. Description
815 Die Holder
816 Die Holding Pin
825 Quick Disconnect Kit
835 Tube Cutter
852 Blank Plate
853 1-1/2 to 3-1/2 in - Flaring/Flanging Tool
855 Die pins (25)
870 O-Rings-Rubber Assist
892 Collet Holder
996 Rotation Dial
950 Program Card System
or
980 Program Card System in Electronic Format




 

die package

016 Die Package Metric Tooling - Export
Radius Dies
No. Radius Size
5040 5 in 40mm
5042 5 in 42mm
5045 5 in 45mm
5048 5 in 48mm
5050 5 in 50mm
5218 5 in 54mm
5060 5 in 60mm
4040 4 in 40mm
4042 4 in 42mm
4045 4 in 45mm
4048 3 in 48mm
4050 4 in 50mm
4218 4 in 54mm
4060 4 in 60mm
3040 3 in 40mm
3042 3 in 42mm
3045 3 in 45mm
3048 3 in 48mm
3050 3 in 50mm
3218 3 in 54mm
Back Shoes
No. Pcs. Size
1340 2 40mm
1342 2 42mm
1345 2 45mm
1348 2 48mm
1349 2 49mm
1218 2 54mm
1360 2 60mm
Reducing Dies
No. Size
760 50mm to 45mm
761 55mm to 50mm
762 65mm to 60mm
Three-Quarter shoes
No. Size
1540 40mm
1542 42mm
1545 45mm
1548 48mm
1550 50mm
1053 54mm
1560 60mm
Swage Dies
No. Size
140 40mm
142 42mm
145 45mm
148 48mm
149 50mm
128 54mm
160 60mm
Collet Sets
No. Size
1740 40mm
1742 42mm
1745 45mm
1700 48mm
1705 50mm
1728 54mm
1760 60mm
Half Shoes
No. Size
1405 40mm
1425 42mm
1455 45mm
1448 48mm
1450 50mm
1051 54mm
1460 60mm
Ball Joint Segments
No. Size
419 50mm
420 55mm
421 60mm
Arbor
No. Size
508 35 to 101mm ID
498 Tip: 35 to 45mm ID
499 Tip: 40 to 101mm ID
Segment Sets
No. Size
473 35 to 45mm ID
474 45 to 54mm ID
475 54 to 64mm ID
476 64 to 76mm ID
Accessories
No. Description
815 Die Holder
816 Die Holding Pin
825 Quick Disconnect Kit
835 Tube Cutter
853 1-1/2 Flaring/Flanging Tool
855 Die pins (40)
870 O-Rings-Rubber Assist
984 Pipe End Shaper
996 Rotation Dial
91176 Ready Rak II









 

die package

028 Die Package Tooling
Radius Dies
No. Radius Size
5530 * 5 in 3 in
5200 * 5 in 2 in
5414 * 5 in 2-1/4 in
5412 * 5 in 2-1/2 in
4200 4 in 2 in
4414 4 in 2-1/4 in
3112 3 in 1-1/2 in
3134 3 in 1-3/4 in
* Requires 41041 retainer
Back Shoes
No. Pcs. Size
1112 2 1-1/2 in
1134 2 1-3/4 in
1200 2 2 in
4211 2 2-1/4 in
4412 2 2-1/2 in
1350 2 3 in
Half Shoes
No. Size
1038 1-1/2 in
1040 1-3/4 in
1045 2 in
4416 2-1/4 in
4410 2-1/2 in

 

Ball Joint Tooling
No. Size
550 1-3/4 in Male **
552 2 in Male ***
553 2-1/4 in Male ****
554 2-1/2 in Male *****
555 1-3⁄4 to 2 in Female
556  2-1⁄4 to 2-1⁄2 in Female
Swage Dies
112 1-1/2 in
134 1-3/4 in
** For a 2 in ID Use Male Ball Tool 550
*** For a 2-1⁄4 in ID Use Male Ball Tool 552
**** For a 2-1⁄2 in ID Use Male Ball Tool 553
***** For a 2-3⁄4 in ID Use Male Ball Tool 554
Collect Sets
No. Size
1712 1-1/2 in
1734 1-3/4 in
1720 2 in
1725 2-1/4 in
1750 2-1/2 in


 

Doming Dies
No. Size
557 2-1/2 in
558 2-3/4 in
Arbor
No. Size
508 1-1/2 to 4 in
498 Tip: 1-1/2 to 1-3/4 in
499 Tip: 1-3/4 to 4 in
Segment Size
No. Size
473 1-1/2 to 1-3/4 in
474 1-3/4 to 2-1/8 in
475 2-1/8 to 2-1/2 in
476 2-1/2 to 4 in
Accessories
853 1-1⁄2 to 3-1⁄2 in Flaring/Flanging Tool
855 Die pins (30)
815 Die Holder
816 Die Holding Pin
870  






 

074 Die Package Tooling - Use with 1674 Expander Only

No. TYPE Size
Arbor and Segments
574* Arbor 27/8 to 6 inch
572 Arbor 1-3/8 to 1-3/4 inch (Solid Piece)
573 Arbor 1-3/4 to 4 inch (Solid Piece)
481 Segment 2-7/8 to 3-1/2 inch
472 Segment 1-1/2 to 1-3/4 inch (Solid Surface)
474 Segment 1-3/4 to 2-1/8 inch
475 Segment 2-1/8 to 2-1/2 inch
476 Segment 2-1/2 to 3 inch Ring Assortment
482 Segment 3-3/8 to 4 inch
483 Segment 3-7/8 to 4-1/2 inch
484 Segment 4-3/8 to 5 inch
485 Segment 4-7/8 to 5-1/2 inch
486 Segment 5-3/8 to 6 inch
* All sizes are ID

074 Tooling Package

Note: Individual tooling is availabel call 1-800-458-3687 ext 1 to receive
pricing on individual tooling for this equipment

 

074 Die package
Arbor and Segments
074 Die Package Tooling -
Use with 1674 Expander Only
No. Type Size
574 * Arbor  2-7/8 to 6 in
572 Arbor  1-3/8 to 1-3/4 in (Solid Piece)
573 Arbor  1-3/4 to 4 in (Solid Piece)
481 Segment  2-7/8 to 3-1/2 in
472 Segment  1-1/2 to 1-3/4 in (Solid Surface)
474 Segment  1-3/4 to 2-1/8 in
475 Segment  2-1/8 to 2-1/2 in
476 Segment  2-1/2 to 3 in
482 Segment  3-3/8 to 4 in
483 Segment  3-7/8 to 4-1/2 in
484 Segment  4-3/8 to 5 in
485 Segment  4-7/8 to 5-1/2 in
486 Segment 5-3/8 to 6 in
* All Sizes are ID


1992 tooling package
1992 3 in Tooling Package
For use on benders with 700 Series or 1700 Series Collets with a clamp style collet holder.
(Standard on all Huth Bender models from
September 1981 to present.)
No. Description
5530 Radius Die - 3 in
1350 Back Shoe (2) - 3 in
1351 Three-Quarter Shoe- 3 in
1352 Half Shoe -3 in
855 Die Pins (6)
892 Collet Holder - 3 in
1730 Collet
853 Flaring/Flanging Tool 1-1/2 to 3-1/2 in
783 Reducer (3  to 2-1/2 in)
130 Swage Die - 3 in
476 * Segment Set (2-1/2 ID to 3 in ID)
*Requires Arbor 508 and Arbor Tip 499 (or) Arbor 573

 

1993 3inch Tolling Package
For use on benders with 200 series collets with either a cam action or spin close style holder.
(Standard on all Huth Bender models from 1955 to September 1981)
No. Description
5530 Radius Die - 3 in
1350 Back Shoe (2) - 3 in
1351 Three-Quarter Shoe - 3 in
1352 Half Shoe - 3 in
855 Die Pins (6)
508 Arbor 1-1/2 to 4 in
499 Arbor Tip 1-3/4 to 4 in
476 Segment Set (2 1/2 ID to 3 in ID)

 
toolling package
1995 2-3/4 inch Tooling Package
For use on benders with 700 Series or 1700 Series Collets with a clamp style collet holder.
(Standard on all Huth Bender models from September 1981 to present.)
No. Description
5534 5 in Radius Die - 2-3/4 in
1234 Back Shoe (2) - 2-3/4 in
1235 Three-Quarter Shoe - 2-3/4 in
1236 Half Shoe - 2-3/4 in
855 Die Pins (6)
1729 * Collet - 2-3/4 in
790 Reducer 3 to 2-3/4 in
129 Swage Die - 2-3/4 in
* Requires 892 Collet Holder
short tooling package
1996 3 inch Short Tolling Package
No. Description
5530 5 in Radius Die - 3 in
1350 Back Shoe (2) - 3 in
855 Die Pins (4)
Choice of one of the following
1351 Three-Quarter Shoe with Pin
1352 Half Shoe with Pin
476 * Segment Set (2-1/2 in ID to 3 in ID)
* Requires Arbor 580 and Arbor Tip 499 (or) Arbor 573
1997 2-3/4 inch Short Tooling Package
1997 2-3/4 inch Short Tooling Package
No. Description
5534 5 in Radius Die - 2-3/4 in
1234 Back Shoe (2) - 2-3/4 in
855 Die Pins (4)
Choice of one of the following:
1235 Three-Quarter Shoe with Pin
1236 Half Shoe with Pin
476 * Segment Set (2-1/2 in ID to 3 in ID)
* Requires Arbor 508 and Arbor Tip 499 (or) Arbor 573
1988 3 inch End Finishing Package
Designed for benders which utilize 700 or 1700 series collets to perform 3 inch swaging.
No. Description
892 Collet Holder - 3 in
1730 Collet - 3 in
130 Swage Die - 3 in
783 Reducer (3 to 2-1/2 in)
853 Flaring / Flanging Tool (1-1/2 to 3-1/2 in)
1989 1-7/8 inch Optional Package
No. Description
4178 4 in Radius Die - 1-7/8 in
178 Swage Die - 1-7/8 in
1178 Back Shoe (2 pcs) - 1-7/8 in
1043 Half Shoe - 1-7/8 in
1778 Collet Set - 1-7/8 in
855 Die Pins (5 pcs)

 
   
   

 

Clamp Collets (All Models After Jan ‘85)

Clamp Collets (All Models After Jan ‘85)
No. IMPERIAL SIZE No. METRIC SIZE
1710 1 in 1740 40mm
1718 1-1⁄8 in 1742 42mm
1714 1-1⁄4 in 1745 45mm
1756 1-5⁄16 in 1700 48mm
1738 1-3⁄8 in 1705 50mm
1712 1-1⁄2 in 1728 54mm ***
1758 1-5⁄8 in 1755 55mm
1734 1-3⁄4 in 1760 60mm
1778 1-7⁄8 in ***  2-1/8 = 54mm
1720 2 in  
1720DF 2 in Double Flare (Use with Part #518)
1728 2-1⁄8 in
1725 2-1⁄4 in
1723 2-3⁄8 in
1750 2-1⁄2 in
1729 2-3⁄4 in *
1731 2-7⁄8 in *
1730 3 in *
* Requires 892 Collet Holder
No. METRIC SIZE
1740 40mm
1742 42mm
1745 45mm
1700 48mm
1705 50mm
1728 54mm***
1755 55mm
1760 60mm

*** 21⁄8 = 54mm

Back to Top

A horizontal rule

Clamp Collets (All Models From Sept. ‘81 to Jan. ‘85) (Vintage Models)

Clamp Collets (All Models From Sept. ‘81 to Jan. ‘85) (Vintage Models)

No. SIZE
710 1"
718 11⁄8"
714 11⁄4"
738 13⁄8"
712 11⁄2"
758 15⁄8"
734 13⁄4"
778 17⁄8"
720 2"
728 21⁄8"
725 21⁄4"
723 23⁄8"
750 21⁄2"

Back to Top

A horizontal rule

Clamp Collets (All Models 1955-Sept. ‘81) (Vintage Models)

Clamp Collets (All Models 1955-Sept. ‘81) (Vintage Models)

No. SIZE
210 1"
218 11⁄8"
214 11⁄4"
238 13⁄8"
212 11⁄2"
258 15⁄8"
234 13⁄4"
278 17⁄8"
220 2"
228 21⁄8"
225 21⁄4"
223 23⁄8"
250 21⁄2"

Back to Top

A horizontal rule

Swage Dies

Swage Dies

No. IMPERIAL SIZE
110 1"
118 11⁄8"
114 11⁄4"
138 13⁄8"
112 11⁄2"
158 15⁄8"
134 13⁄4"
178 17⁄8"
120 2"
128 21⁄8"
125 21⁄4"
123 23⁄8"
150 21⁄2"
129 23⁄4"
130 3"
No. METRIC SIZE
140 40mm
142 42mm
145 45mm
148 48mm
149 50mm
128 54mm***
155 55mm
160 60mm
***21⁄8"=54mm

Back to Top

A horizontal rule

Reducing Dies

Reducing Dies

* Reducing Dies Require Clamp Collet 890, 891, or 892.

No. IMPERIAL SIZE*
780 2" to 13⁄4"
781 21⁄4" to 2"
782 21⁄2" to 21⁄4"
783 3" to 21⁄2"
784 2" to 17⁄8"
785 13⁄4" to 15⁄8 "
786 15⁄8 " to 11⁄2 "
787 11⁄2" to 13⁄8"
788 13⁄8" to 11⁄4 "
789 11⁄4" to 11⁄ 8 "
790 3" to 23⁄4 "
No. METRIC SIZE*
760 (50mm to 45 mm OD)
761 (55mm to 50mm OD)
762 (60mm to 55mm OD)

Back to Top

A horizontal rule

Ball Joint Tools

Ball Joint Tools

No. SIZE
550 13⁄4" (Male)
551 17⁄8" (Male)
552 2" (Male)
553 21⁄4"(Male)
554 21⁄2"(Male)
557 13⁄4" to 21⁄2" (Domer)
558 25⁄8" to 23⁄4" (Domer)
555 13⁄4" , 17⁄8", 2" (Female)
556 21⁄4" to 21⁄2" (Female)
564 23⁄4" to 3" (Female)

Back to Top

A horizontal rule

Flaring/Flanging Tools

Flaring/Flanging Tools

No. SIZE
518 Flare Tool - 2" Double Flare and 11⁄2" Flat Flare*
519 Flare Tool - 13⁄4" and  15⁄8" Double Flat Flare*
853

Pipe Flanger 11⁄2"  to 3" - (Replaces Pipe Flangers 848, 849, 850, 851)

*NOT SHOWN

Back to Top

A horizontal rule

Header Collector Tool

Header Collector Tool

No. SIZE
101 3"
102 31⁄2"

 

Clamp Collets (All Models After Jan ‘85)
Clamp Collets (All Models After Jan 1985)
No. IMPERIAL SIZE
1710 1 inch
1718 1-1/8 inch
1714 1-1/4 inch
1756 1-5-16 inch
1738 1-3/8 inch
1712 1-1/2 inch
1758 1-5/8 inch
1734 1-3/4 inch
1778 1-7/8 inch
1720 2 inch
1720DF 2 inch Double Flare (Use with Part #518)
1728 2-1/8 inch
1725 2-1/4 inch
1723 2-3/8 inch
1750 2-1/2 inch
1729 2-3/4 inch
1731 2-7/8 inch *
1730 3 inch *

*Requires 892 Collet Holder 

For Clamp Collets Prior To 1985 See Replacement Parts -  Vintage

No. METRIC SIZE
1740 40mm
1742 42mm
1745 45mm
1700 48mm
1705 50mm
1728 54mm ***
1755 55mm
1760 60mm

*** 2-1/8 = 54mm

 

Clamp Collets (All Models From Sept. 1981 to Jan. 1985) (Vintage Models) Clamp Collets (All Models 1955-Sept. 1981) (Vintage Models)
No. SIZE
710 1 inch
718 1-1/8 inch
714 1-1/4 inch
738 1-3/8 inch
712 1-1/2 inch
758 1-5/8 inch
734 1-3/4 inch
778 1-7/8 inch
720 2 inch
728 2-1/8 inch
725 2-1/4 inch
723 2-3/8 inch
750 2-1/2 inch
No. SIZE
210 1 inch
218 1-1/8 inch
214 1-1/4 inch
238 1-3/8 inch
212 1-1/2 inch
258 1-5/8 inch
234 1-3/4 inch
278 1-7/8 inch
220 2 inch
228 2-1/8 inch
225 2-1/4 inch
223 2-3/8 inch
250 2-1/2 inch
Swage Dies
No. IMPERIAL SIZE
110 1 inch
118 1-1/8 inch
114 1-1/4 inch
138 1-3/8
112 1-1/2 inch
158 1-5/8 inch
134 1-3/4 inch
178 1-7/8 inch
120 2 inch
128 2-1/8 inch
125 2-1/4 inch
123 2-3/8 inch
150 2-1/2 inch
129 2-3/4 inch
130 3 inch
No. METRIC SIZE
140 40mm
142 42mm
145 45mm
148 48mm
149 50mm
128 54mm ***
155 55mm
160 60mm
*** 2-1/8 inch =54mm
Reducing Dies
* Reducing Dies Require Clamp Collet 890, 891, or 892.
No. IMPERIAL SIZE*
780 2 to 1-3/4 inch
781 2-1/4 to 2 inch
782 2-1/2 to 2-1/4 inch
783 3 to 2-1/2 inch
784 2 to 1-7/8 inch
785 1-3/4 to 1-5/8 inch
786 1-5/8 to 1-1/2 inch
787 1-1/2 to 1-3/8 inch
788 1-3/8 to 1-1/4 inch
789 1-1/4 to 1-1/8 inch
790 3 to 2-3/4 inch
No. METRIC SIZE*
760 (50mm to 45 mm OD)
761 (55mm to 50mm OD)
762 (60mm to 55mm OD)
Ball Joint Tools Flaring/Flanging Tools
No. SIZE
550 1-3/4 inch (Male)
551 1-7/8 inch (Male)
552 2 inch (Male)
553 2-1/4 inch (Male)
554 2-1/2 inch(Male)
557 13⁄4" to 2-1/2 inch (Domer)
558 25⁄8" to 2-3/4 inch (Domer)
555 13⁄4" , 17⁄8", 2 inch (Female)
556 21⁄4" to 2-1/2 inch (Female)
564 23⁄4" to 3 inch (Female)
No. SIZE
518 Flare Tool - 2 inch Double Flare and 11⁄2 inch Flat Flare *
519 Flare Tool - 13⁄4  and  15⁄8 inch Double Flat Flare*
853

Pipe Flanger 11⁄2  to 3 inch - (Replaces Pipe Flangers 848, 849, 850, 851)

Header Collector Tool
No. SIZE
101 3 inch
102 3-1/2 inch

 

Arbors and Tips

A horizontal rule

A horizontal rule

Segment Sets

A horizontal rule

Note: Parts 508, 509, 499 may be replaced with solid arbors 572 / 573. One piece arbors are an alternative for working with heavier or harder materials. Note: - Older Segments from 1-1/2" to 2-3/4", See Replacement Parts Vintage

No. Description* Comments Finger No.
470 15⁄16" - 13⁄32" Used with 575 with 570 Spacer or 496 Arbor 670
404 13⁄32" - 11⁄4" Used with 575 with 570 Spacer or 496 Arbor 604
400 13⁄16" - 11⁄2" Used with 500 or 495 Arbor 600
472 13⁄8" - 13⁄4" Used with 508 Arbor with 498 Tip or 572 Arbor 672
473 13⁄8" - 13⁄4" Used with 508 Arbor with 498 Tip or 572 Arbor (Yellow) 673
474 13⁄4" - 21⁄8" Used with 508 Arbor with 499 Tip or 573 Arbor (Red) 674
475 21⁄8" -21⁄2" Used with 508 Arbor with 499 Tip or 573 Arbor (Black) 675
476 21⁄2" - 3" Used with 508 Arbor with 499 Tip or 573 Arbor (Green) 676
477 3" - 31⁄2" Used with 508 Arbor with 499 Tip or 573 Arbor 677
478 31⁄2" - 4" Used with 508 Arbor with 499 Tip or 573 Arbor 678
403 23⁄4" - 31⁄8" Used with 503 Arbor Requires 512 or 523 Adj Collar 603
406 31⁄8" - 31⁄2" Used with 503 Arbor Requires 512 or 523 Adj Collar 606
408 31⁄2" - 4" Used with 503 Arbor Requires 512 or 523 Adj Collar 608
450 4" - 47⁄8" Used with 503 Arbor Requires 512 or 523 Adj Collar 650
451 47⁄8" - 51⁄2" Used with 503 Arbor Requires 512 or 523 Adj Collar 651

*All Sizes are IDs

For older style segment sets from 1-1-2" to 2-3/4" see Replacement Parts - Vintage

A horizontal rule
No. Description* Comments Finger No.
481 27⁄8" - 31⁄2" Used with 574 Arbor (1674 Model Only) 681
482 33⁄8" - 4" Used with 574 Arbor (1674 Model Only) 682
483 37⁄8" - 41⁄2" Used with 574 Arbor (1674 Model Only) 683
484 43⁄8" - 5" Used with 574 Arbor (1674 Model Only) 684
485 47⁄8" - 51⁄2" Used with 574 Arbor (1674 Model Only) 685
486 53⁄8" - 6" Used with 574 Arbor (1674 Model Only) 686
* All Sizes are IDs
A horizontal rule
No. Description Comments Finger No.
405  11/8" - 11/2" Used with 575 Arbor with 570 Spacer 605
440  11/2" - 21/2" Used with 508 Arbor with 499 or 573 Arbor 640
441  21/2" - 31/2" Used with 508 Arbor with 499 or 573 Arbor 641
A horizontal rule
No. Description* Comments Finger No.
410 13⁄4" - 17/8" Used with 508 Arbor with 499 or 573 Arbor 610
419 2" Used with 508 Arbor with 499 or 573 Arbor 619
420 21⁄4" Used with 508 Arbor with 499 or 573 Arbor 620
421 21⁄2" Used with 508 Arbor with 499 or 573 Arbor 621
452 3" Used with 508 Arbor with 499 or 573 Arbor 652
453 31⁄2" Used with 503 Arbor (Requires 512 or 523) 653
*Note: Original Tube Sizes
A horizontal rule
No. Description* Comments Finger No.
411 13/4" Used with 508 Arbor with 499 or 573 - 413 or 414 Required 611
413  2" Ring - Use with 411  
414  21/4" Ring - Use with 411  
412 21⁄2" Used with 508 Arbor with 499 or 573 - 418 Required 612
418  21⁄2" Ring - Use with 412  
*Note: Original Tube Size
A horizontal rule
No. Description* Comments Finger No.
460 11⁄4" Used with 575 Arbor and 570 Spacer 660
461 11⁄2" Used with 500 Arbor 661
462 13⁄4" Used with 572 Arbor or 508 Arbor with 498 Tip 662
463 2" Used with 573 Arbor or 508 Arbor with 499 Tip 663
464 21⁄4" Used with 573 Arbor or 508 Arbor with 499 Tip 664
465 21⁄2" Used with 573 Arbor or 508 Arbor with 499 Tip 665
466 3" Used with 573 Arbor or 508 Arbor with 499 Tip 666
467 31⁄2" Used with 573 Arbor or 508 Arbor with 499 Tip 667
468 4" Used with 573 Arbor or 508 Arbor with 499 Tip 668
*Note: Original Tube Size

A horizontal rule

Arbors and Segments (Vintage Models)

A horizontal rule


NO. DESCRIPTION COMMENTS FINGER NO.
501 Arbor 11⁄2" - 13⁄4" Used with Segment 422  
502 Arbor 13⁄4" - 23⁄4" Used with Segments 423, 424, and 425  
422 Segment 11⁄2" - 13⁄4" Used with Arbor 501 622
423 Segment 13⁄4" - 21⁄8" Used with Arbor 502 623
424 Segment 21⁄8" - 21⁄2" Used with Arbor 502 624
425 Segment 21⁄2" - 23⁄4" Used with Arbor 502 625

 

Copyright © 2021 Smith-Hamilton, Inc
0.003 150419 18:39